1 YEAR FREE C LINE SOFTWARE ALI 35C F1 F2 2019

1 YEAR FREE C LINE SOFTWARE ALI 35C F1 F2

Hello Friends, Today I am going to share a software with you that you can get 1 year free
C line in your receiver. If you upgrade this software to your receiver, you will get 1 year free Cline, which you can use for 1 year comfortably and it will not make any sense. There is very good software and it will upgrade to your receiver comfortably. If your receiver is Ali 35c then it will be upgraded in your receiver. So let\’s start and tell you all the details how to download this software and how to upgrade it in your receiver.

 To upgrade it in your receiver, first of all you have to download it and put it in some USB blank. To download it, you are given a link below, just click on that link and you will reach the software and you download it.  You have to insert it into a USB that does not have anything else. After that you have to put that USB in your receiver But remember that the loud sewer is told to you, this software is only for that Means there is software for f1 and f2 After that when you plug in your USB receiver, you Go to Settings: After going to Settings, you will see an option Upgrade by USB You just have to click on it Another thing is the software in your USB So he is not present in any folder, he is lying like this. So after that when you click on the software, your software will start happening. So take care of one thing That when you are upgrading your receiver and make sure that your light does not go out. The software upgrade option will go from 1 to 100 percent and after that your receiver You will be off and then on again, your receiver\’s software will be upgraded.

HOW TO ENABLE C LINE OPTION

To turn on the C line option in the receiver, first you have to go to the menu And by going there you have to press 6666 Then you will have the server option turned on. So from that you can activate your free c line for 1 year and you can use it to watch all the
Paid channels.

To connect your receiver to WiFi, first of all you have to have a WiFi antenna which means tenda device This allows you to connect your receiver to the mobile through WiFi or to a WiFi device. You have to go to the settings first and by going there you have to go to the internet settings and after you have selected WiFi, after selecting WiFi you An option will come in front of you, if your hotspot is on, then your network will come in front of you and you have to connect from there.

F1 f2 green go to Ali 35c All these to upgrade the software in this receiver You have to remember the things and after that you have to upgrade the software in your receiver. First of all, you have to check the version of your receiver. The version given below has to be software for the same receiver.

Apart from this, if you have any other receiver other than Green Go to F1 f2, then you will not try this software in it.
If you do this software in it, it may cause your receiver to hang or malfunction, or this software will not match it, then your receiver is damaged.
And keep in mind that the software you are doing, do it with a USB that does not have any other data or software. There should be only the software that I have given you, you should just put it in that USB and the rest of that USB should be empty. Only then your receiver will be upgraded and you will be able to use 1 year of server Apart from this, another important thing is that when you upgrade this software, your receiver will be changed after its upgrade. Meaning that your Receiver functions will change But it won\’t spoil your receiver\’s performance.

Apart from this version, you should not try this software on any other version
Also, when you are upgrading your receiver, you are sure that your power will not go. If this happens for one reason or the other, your receiver is in danger of getting damaged So remember this, do software in your receiver so that you know this thing.
This will be slightly different from the software already present in your receiver. And there may be some options change.

To download this software, first of all you need You will have to click on the following link, after which a new page will open in front of you. When you click on the download button below, a page will open in front of you and it will be written on it. So if you have to click on it too, then your software will start downloading and it will download to the memory of the mobile and you can put it in your USB and After this you can upgrade this software to your receiver Remember that you can upgrade only via USB. I hope that you have understood all the things and you are giving your receiver  Upgrade software without any hassle.

Many thanks to all the friends who came to this website and they read my post and you downloaded the software.

NOTE.  If you want to ask any question about it, that means you want to ask any question about this software, then you can reach me via email or express your opinion in the comment box.