Open box 1506G Original And Open Box 1506G DSCAM Enable Software| Techworld1

Hello friends, today I am going to share with you a software of open box receiver which you can install in your receiver and run fast C line. By the way, open box receiver is a very good quality receiver. Which a lot of people use to run the C line. By the way, there are many updates of this, but today I am going to share an update with you so that you will be able to use this receiver much more fast in the C line. So let\’s talk about where you can download this software and its version is shown in the image above. So let\’s get started.

First of all, let me show you how to update the software in the receiver So that you do not face any problem in updating the software in your receiver. First of all, you have been given a download button below and you have to download the software by clicking on it. 

1. And after that when you download this software, you are bound to have a blank USB.

2. You have to put this software in that blank USB and after putting the software in it.

3. After this, you have to insert the USB into your receiver. 

4. When you put this USB in your receiver, then after that you Go to your receiver settings and there you will see an option Upgrade by USB.

5. If you want to click on the option with your upgrade by USB, then your USB will come in front of you and the software in it will also come in front of you. 

6. So after that you have to click on that software, then the software will start updating. This software will be updated shortly.

7. Your receiver will be turned off after the software is updated, your receiver will turn on in 2 to 3 seconds after it is off. Your software will be updated when your receiver is on And after that you can use fast Cline in your receiver.

After the software update, you can enable the DSCAM option or any of your You can use the C line by putting it in. Now your receiver will run the C line in a very fast way. If you have an original open box, your receiver logo will not change. When your receiver\’s software is done, So after this, your receiver\’s internet setting will be changed, meaning that your receiver and your internet setting will have WiFi and there you have to go and select GPRS if you want to use SIM card. If you do not have a SIM card and you want to use WiFi, then there is no need to change that setting.

When you want to upgrade software, first of all keep these things in mind and update your software.

1. Check your receiver\’s version before upgrading software.

2. To upgrade the software, you must have a blank USB that does not force any more data. 

3. When you are upgrading the software, your receiver should not be off, meaning your light should not go off, if this happens then your receiver may be defective.

4. This software is only for 1506G open box. 

5.  And software can be used in 1506G receiver but their version is similar.

To download the software, a download button is given below, you just have to click on it and a new page will open in front of you, you will have written a download on it, you have to download your software by clicking on it. 

NOTE.  If you want to ask me anything about this software, you can express your opinion in the comment box or you can contact me by email, you will try to reply as soon as possible.

 Many thanks to all the friends who came to my website and they downloaded this software And read the article.